■ 30
│
GB
│
MT SDM 1500 D2
After use
1) Allow the appliance to cool down.
2) Remove the pad 6.
3) Remove the water tank 8 from the appliance and empty it.
4) Pull the upper cable hook z out a little and turn it back upwards.
Wind the cable back around the two cable hooks z/i.
Fix the end of the power cable using the cable clip located on the cable.
Cleaning and care
RISK OF ELECTRIC SHOCK!
► Always remove the mains power plug before cleaning the appliance!
WARNING! RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Risk of burns!
CAUTION! PROPERTY DAMAGE
► When cleaning the surfaces use neither abrasive or chemical cleaners,
nor sharp or scratchy objects.
■ Empty the water tank 8 after every use.
■ After each use, remove the pad 6/o from the steam foot 5 and wash it out.
■ Note the following washing instructions when you wash the pad 6/o in
the washing machine:
Wash at max. 60 °C
Do not bleach
Do not tumble dry
Do not iron
■ If necessary, wipe the appliance with a damp cloth. For stubborn soiling use
a mild detergent on the cloth.
To Next Page
Loading...
