SilverCrest SDR 1.5 A1
16 - English
9.6 Sleep timer
The sleep timer function lets you set a time of between 15 and 90 minutes, after
which the digital radio will switch off automatically.
Press and hold the button (5) for approx. 2 seconds until “15 minutes”
is shown on the display (3).
The number of minutes increases every time you press the button (5). You
can also scroll through the options by pressing the I◂◂ button (6) and ▸▸I
button (7): “15 minutes”, “30 minutes”, “45 minutes” “60 minutes”, “90
minutes” and “Sleep off”. “Sleep off” disables the sleep timer.
Press the OK / AMS button (8) briefly to confirm your selection.
When the Sleep Timer is activated, a clock icon is shown on the display (3).
You can display the time remaining on the sleep timer by pressing the INFO /
MENU button (2) several times to toggle what is shown on the display (3).
You can also cancel the sleep timer simply by switching the digital radio off.
9.7 Automatic station scan
Start automatic tuning by pressing the OK / AMS button (8) and holding it down
for about 2 seconds. With this function, any stations found are saved
automatically.
The unit only scans for DAB or for FM stations, depending on the
mode selected.
9.8 Storing presets
You can save up to 30 stations or frequencies for each frequency band.
Tune in the station that you want to store.
Press and hold the FAV / SEARCH button (11) for approx. 2 seconds until
“Preset Store” is shown on the display (3).
Use the I◂◂ (6) and ▸▸I (7) buttons to select the preset where you want to
store the station.
Press the OK / AMS button (8) briefly to finish saving.