SilverCrest SDR 1.5 A1
English - 27
9.12.10 SW version
This option allows you to display the software version on the digital radio.
Press and hold the INFO / MENU button (2) for approx. 2 seconds.
In the System menu, use the I◂◂ (6) and ▸▸I (7) buttons to select the “SW
version” option.
Press the OK / AMS button (8) briefly.
The current software version installed is displayed.
9.13 Connecting headphones
Be careful when using headphones. Listening at a high volume
can damage your hearing.
You can connect headphones (not supplied) with a 3.5 mm jack connector to
the headphone jack (14). The loudspeaker (1) is switched off if headphones
are connected.
9.14 Storage when not in use
If you will not be using the digital radio for a long period of time, remove any
batteries. If an optional power adapter is used, first disconnect it from the digital
radio.
Store the digital radio in a dry, cool place.