EasyManuals Logo

Silvercrest SDRB 1000 C1 User Manual

Silvercrest SDRB 1000 C1
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
10
GB
6.6 Ironing
FIRE HAZARD!
~ Before turning the device on, place it on
a level, stable, dry, heat-resistant sur-
face.
DANGER! Risk of injury
through burning!
~ The sole plate14 becomes very hot.
Only touch the handle8 and control el-
ements of the device during operation.
NOTES:
The sole plate14 cools down slightly
while you are ironing and therefore has
to be repeatedly heated back up to the
set temperature. During the heating pro-
cess the control lamp7 lights up. You
can continue ironing at the same time.
Sensitive fabrics are ironed at lower
temperatures and without steam.
1. Set the temperature controller4 to
MIN.
2. Connect the mains plug10 with the
wall socket.
3. Set the desired temperature using the
temperature controller4. The control
lamp7 lights up.
4. Start ironing as soon as the ironing
temperature has been reached and the
control lamp7 goes out.
5. Finish ironing, set the temperature con-
troller4 to MIN and pull out the mains
plug10.
6. Allow the device to cool down.
7. Open the cover2 over the filler open-
ing3.
8. Pour any remaining water out of the
water tank1 through the filler open-
ing3.
7. Cleaning
DANGER! Risk of electric
shock!
~ Pull the mains plug10 out of the wall
socket before you clean the device.
DANGER! Risk of injury
through burning!
~ Allow the device to cool down before
cleaning.
CAUTION:
~ Do not use any astringent or abrasive
cleaning agents.
Cleaning the device
For cleaning the device, use a soft,
moistened cloth.
Dirt can be removed from the sole
plate14 using commercially available
cleaning agents for chrome, silver or
stainless steel.
Residues that have melted on the sole
plate14 can be removed by heating the
device up to the MAX setting and then
ironing on an old cotton cloth.
Descaling
If the steam power is reduced after a certain
time, please descale the device.
You should use a commercially availa-
ble limescale remover that is based on
citric acid to descale the iron. Please fol-
low the instructions for the limescale re-
mover.
BB&3(B%ERRN6HLWH0RQWDJ-XOL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SDRB 1000 C1 and is the answer not in the manual?

Silvercrest SDRB 1000 C1 Specifications

General IconGeneral
BrandSilvercrest
ModelSDRB 1000 C1
CategorySteam Cleaner
LanguageEnglish

Related product manuals