GB
│
IE
│
NI
│
CY
│
7 ■
SFM 850 A5
CAUTION! APPLIANCE DAMAGE!
► When filling the frying container with fat, never fill it to
above the MAX marking or to below the MIN marking.
Whenever you intend to switch the appliance on, first ensure
that there is sufficient oil or fat in the deep fat fryer.
► Never switch the appliance on if there is no oil or liquid fat
in it. Otherwise the appliance may overheat.
► This deep fat fryer is suitable only for frying foodstuffs. It is
not designed for cooking liquids.
NOTE
► No user action is required to switch the product between
50 and 60 Hz. The product adapts automatically to either
50 or 60 Hz.
Before first use
Before you use the deep fat fryer for the first time, please clean all individual
components thoroughly and carefully dry them (see chapter “Cleaning and
care”).
Low-acrylamide cooking
Acrylamide is a possibly carcinogenic substance formed from a reaction with
amino acids when frying foodstuffs with a high starch content. The formation
of acrylamide increases dramatically at temperatures of more than 175°C.
You should therefore avoid frying foodstuffs with a high starch content, for
example chips, at temperatures above 170°C. The foodstuffs should only be
fried to golden-yellow, instead of dark or brown. This is the only way to achieve
low-acrylamide cooking.
Deep frying
We recommend cooking oil or liquid cooking fat for use in this deep fat fryer.
You can also use solid cooking fats. Read the chapter “Solid cooking fats” for
more information.
IB_352648_SFM850A5_GB-IE-NI-CY.indb 7 17.12.2020 09:10:01
To Next Page
Loading...
Need help?
General
