36 GB/IE/NI
Press the ON / OFF / MEASURE button
8
.
Keep it pressed down for 10 seconds whilst you
insert the batteries back into the device.
Release the ON / OFF /
MEASURE button
8
again once DEL ap-
pears in the display.
Remove the batteries
again.
Now all of the saved data on the device has been de-
leted and the device is restored to its factory settings.
Cleaning and care
ATTENTION! Possible property damage! Never
hold the product under water as liquid could enter the
product and damage it.
Clean the
sensor tip
1
and forehead /
cover cap
2
after each use.
Use a soft cloth or a cotton bud which can be
dampened with antiseptic, alcohol or warm water
to do so.
338571_2001_silv_Multifunktionsthermometer_Content_IE_NI_DK_BE_NL.indd 36338571_2001_silv_Multifunktionsthermometer_Content_IE_NI_DK_BE_NL.indd 36 26.05.20 10:5526.05.20 10:55
To Next Page
Loading...
