30 GB/IE/NI
If the measured value lies within the normal range
(<38°C / 100.4°F), the LED above the display
will light up green for 3 seconds. If the measured
value is higher than this (≥ 38°C/100.4°F =
fever), the LED will light up red.
If you have activated Bluetooth
®
data transfer, the
data will be transferred after the measurement. The
thermometer displays the symbol for Bluetooth
®
during transfer.
Note: The “HealthForYou“ app must be activated
for transfer to occur. If the current data is not dis-
played on your smartphone, repeat the transfer
process as described in the chapter “transferring
measured values“.
The device will switch off automatically after 60
seconds (if no Bluetooth
®
connection is available)
or press the ON / OFF / MEASURE button
8
for 5 seconds to switch it off.
Clean the device after every use as described in
the chapter “Cleaning and care“.
Measuring object temperatures
To switch on the multi-function thermometer, press
the ON / OFF / MEASURE button
8
for one
second.
Then press the M button
7
and the S button
6
at the same time for 3 seconds to change to the
object temperature mode.
appears on the LC
display.
338571_2001_silv_Multifunktionsthermometer_Content_IE_NI_DK_BE_NL.indd 30338571_2001_silv_Multifunktionsthermometer_Content_IE_NI_DK_BE_NL.indd 30 26.05.20 10:5526.05.20 10:55
To Next Page
Loading...
