English -71
Ask your water utility about the water hardness.
Water hardness
Regeneration
at every X
programme
sequence*
Salt con-
sumption
P must be
pressed
Display
LED ON/LED OFF
dH
(degree
of German
hardness)
mmol/l
(milli-
mole per
litre)
ECO
0–5 0–0.94 H1 – Press 1 x OFF OFF ON
6–11 1.0–2.0 H2 10 Press 2 x OFF ON OFF
12–17 2.1–3.0 H3 5 Press 3 x
(Factory set-
tings)
OFF ON ON
18–22 3.1–4.0 H4 3 Press 4 x ON OFF OFF
23–34 4.1–6.0 H5 2 Press 5 x ON OFF ON
35–55 6.1–9.8 H6 1 Press 6 x ON ON OFF
* When regeneration is carried out during a programme, an additional 2.2 l of water is required,
the energy consumption increases by 0.01 kWh and the programme is extended by 4 minutes.
Close the appliance door.
Press the button
(18)
to switch on the appliance and make settings.
Press and hold the P button (17) for approx. 5 seconds.
Then press the P button (17) several times in accordance with the table above to set the
salt consumption.
If you do no press any button within 5 seconds, the appliance switches to standby
mode.
9.5. About dishwasher detergents
9.5.1. Types of detergent
Dishwasher detergent ensures that dirt is loosened and removed from dishes and cutlery.
Always use detergents suitable for dishwashers. There are three types of dishwasher deter-
gent:
• Detergents with phosphate and chlorine
• Detergents with phosphate and without chlorine
• Detergents without phosphate and without chlorine
To Next Page
Loading...