Silvercrest SHBR 560 B1 - Cleaning Hard Floors; Hard Floor Operation

■ 12
│
GB
│
IE
SHBR 560 B1
Ƈ Press the hard floor switch r to switch the appliance on (see fig. 13).
The LED on the hard floor switch r lights up blue.
Fig. 12 Fig. 13
Ƈ Before each use, press the cleaning solution switch
t twice briefly to activate the
continuous spray function and add cleaning solution to the rotary brush 6 so that
it is ready for operation (see fig. 14). The cleaning solution display w flashes
alternately blue when the continuous spray function is activated or the cleaning
solution switch t is being held down (see fig. 15).
2 x
Fig. 14 Fig. 15
Ƈ Activate the continuous spray function
during cleaning with both forward and
backward movements with the appliance. This way, the cleaning solution is
evenly applied to the hard floor via the rotary brush 6.
Ƈ Press the cleaning solution switch
t twice briefly again to deactivate the
continuous spray function.
NOTE
►
For stubborn soiling, move the appliance over the soiled areas several times
and activate the continuous spray function.
Ƈ Press the hard floor switch
r again to switch the appliance off (see fig. 13).