Silvercrest SHBR 560 B1 - Cleaning Carpets; Carpet Cleaning Preparation; Carpet Cleaning Operation

GB
│
IE
│
13 ■
SHBR 560 B1
Cleaning carpets
NOTE
► Before using the appliance to clean a carpet, test the appliance on an
inconspicuous area of the carpet.
► Before cleaning, check the carpet manufacturer's label for special care
instructions. The appliance is not suitable for sensitive carpets (e.g. silk,
leather, flokati etc.).
Once the appliance is assembled and the fresh water tank
q is filled with water
and cleaning solution:
Ƈ Unwind the power cable
u completely from the upper and lower cable retainers
z/p. To unwind the power cable u quickly from the cable retainers z/p,
pull the upper cable retainer z out a little way and turn it downwards (see
fig. 16).
Ƈ Insert the plug into the mains power socket.
Ƈ Press the carpet switch
e to switch the appliance on (see fig. 17).
The LED on the carpet switch e lights up blue.
Fig. 16 Fig. 17
Ƈ Before each use, press the cleaning solution switch
t twice briefly to add
cleaning solution to the rotary brush 6 so that it is ready for use (see fig. 18).
The cleaning solution display w flashes alternately blue when continuous spray
function is activated or the cleaning solution switch t is being held down
(see fig. 19).