To Next PageTo Next PageWhat to do if my Silvercrest SIKP 3400 A1 doesn't start the cooking process?
If your Silvercrest Hob isn't starting the cooking process, it could be due to one of two reasons. Firstly, ensure that there is suitable cookware on the cooking area. Secondly, the cookware might not be suitable for induction cooking areas; make sure you are using appropriate cookware.
Why does 'E08' appear on my Silvercrest SIKP 3400 A1 Hob display?
If 'E08' is displayed on your Silvercrest Hob, it indicates that the temperature sensor is defective. Disconnect the plug from the mains power socket and contact the Customer Services department.
Why does 'E06' appear on my Silvercrest SIKP 3400 A1 display?
If 'E06' appears on the display of your Silvercrest Hob, the temperature sensor underneath the cooking area is either defective or there is a short circuit. Disconnect the plug from the mains power socket and contact the Customer Services department.
Why does 'E02' appear on my Silvercrest SIKP 3400 A1 display?
If 'E02' is displayed on your Silvercrest Hob, it means the appliance is receiving too much voltage (more than 270 V). Verify that the appliance is connected to a properly installed mains power socket providing 220 - 240 V ~, 50 Hz.
Why does 'E01' appear on my Silvercrest SIKP 3400 A1 Hob display?
If 'E01' appears on your Silvercrest Hob display, it indicates that the appliance is not receiving enough voltage (less than 160V). Ensure that the hob is connected to a properly installed mains power socket supplying 220 - 240 V ~, 50 Hz.
What does it mean when ' - - - ' appears on the Silvercrest SIKP 3400 A1 display?
If you see '- - -' on your Silvercrest Hob display, this usually means that there is no cookware or unsuitable cookware on the respective cooking area. Ensure you place suitable cookware centrally on the cooking area.
Why does 'E07' appear on my Silvercrest SIKP 3400 A1 display?
If 'E07' is showing on your Silvercrest Hob display, it indicates that the appliance is too hot while in Temperature-Mode. Disconnect the plug from the mains power socket and allow the appliance to cool down completely before using it again.
Why does 'E05' appear on my Silvercrest SIKP 3400 A1 display?
If 'E05' appears on the display of your Silvercrest Hob, it means the appliance is too hot, specifically when in power levels mode. To resolve this, disconnect the plug from the mains power socket and wait until the appliance has cooled down.
Why does 'E03' appear on my Silvercrest SIKP 3400 A1 display?
If 'E03' is displayed on your Silvercrest Hob, this indicates a short circuit inside the appliance. Immediately disconnect the plug from the mains power socket and contact the Customer Services department!
General| Type | Induction |
|---|---|
| Power | 3400 W |
| Number of cooking zones | 2 |
| Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Features | Child safety lock |
Specifies the exclusive purpose and domestic household use of the appliance.
Lists included components and provides guidance on environmentally friendly packaging disposal.
Details appliance parts and controls, along with technical specifications like voltage and power.
Ensures the power cable remains dry, undamaged, and properly connected to prevent shock.
Explains how the induction cooker generates heat and lists criteria for appropriate cookware.
Provides instructions on positioning the appliance and connecting it safely to the mains power.
Details how the different cooking areas function, including power levels and sharing capabilities.
Provides information on correct disposal methods and compliance with EC directives.
Outlines the terms and conditions of the 3-year warranty for the appliance.
Provides contact details for customer service and repair information in Great Britain and Ireland.
