Silvercrest SIRD 14 A1 - Switching the Alarm off

SilverCrest SIRD 14 A1
164 - English
“AM” will flash only if you have chosen the 12-hour time format. Rotate the NAVIGATE knob [4] to
select “AM” for the morning hours or “PM” for the afternoon hours and press the NAVIGATE knob
[4] to confirm your selection.
[Mode:] This let you set how you want to be woken up. The following options are available:
“Buzzer”, “Internet radio”, “DAB” and “FM”.
If no Internet connection is available, the buzzer will sound.
[Preset:] This lets you select the radio station you would like to wake you up. You can select the
“Last listened” option or choose a station from your favourite list. Please note that this function is not
available if the “Buzzer” option has been selected.
[Volume:] Rotate the NAVIGATE knob [4] to set the wake-up volume you want. Press the
NAVIGATE knob [4] to confirm.
[Save] Select this option and press the NAVIGATE knob [4] to save the settings. After an alarm
has been enabled, the display [2] shows a bell icon 1 (Alarm 1) or 2 (Alarm 2). In standby mode,
the alarm time set is also shown on the display [2].
Switching the alarm off
When the alarm starts, you can disable it as follows.
 Press the Snooze button [1] several times to delay the alarm for 5, 10, 15 or 30 minutes. After
this period, the alarm starts again.
 Press the VOLUME knob [10] to disable the alarm.