Silvercrest SLE 320 A2 - Technical Specifications and Compliance; Detailed Technical Data; Declaration of Conformity Details

■ 22
│
GB
SLE 320 A2
Appendix
Technical data
Input voltage 220 - 240V
~
50Hz
Input power 320W
Nominal current: 1.6A
Maximum output power 380W
Maximum nominal current 1.8A
Air flow rate 160m³/h
Water tank 7.0l
Intake pressure 1.0MPa
Ejected pressure 2.5MPa
Dehumidification performance /
24h*
20l (at 30 °C / 80% rh)
12l (at 27 °C / 60% rh)
Recommended room size
approx. 20m
2
or approx 46m
3
(at a ceiling height of 2.3m)
Operating temperature +5 °C to +35 °C
Dimensions approx. 60.0 x 38.0 x 28.5cm
Weight approx. 13kg
*The lower the ambient temperature is and the colder the temperature outside
becomes, the less moisture accumulates in the air and flows from outside into the
room to be dehumidified. For this reason, dehumidification performance steadily
decreases when temperatures drop and can come to a standstill. This does not
mean that the appliance is defective.
Notes on the Declaration of Conformity
In terms of compliance with fundamental specifications and
other relevant regulations, this appliance complies with the
Low Voltage Directive 2014/35/EU, the Electromagnetic
Compatibility Directive 2014/30/EU and the Ecodesign
Directive 2009/125/EC.
The complete Declaration of Conformity, in its original form,
is available with the importer.