SilverCrest SLL 16 C1
46 - English
9.3.2 Deactivate TWS mode
• Briefly press (6) on any speaker to disable TWS mode. After a
beep, the TWS LED (10) will switch off on both speakers.
• Playback will now continue through the main speaker only.
• You can reactivate TWS mode by briefly pressing the (6) button
on both speakers to restart TWS coupling mode.
9.4 AUX IN mode
You can listen to music from a portable audio device connected to the
3.5 mm jack cable (C).
Use the supplied 3.5 mm jack cable (C) for AUX IN mode.
Once a 3.5 mm jack plug is inserted into the AUX IN jack (7)
of the speaker when the device is switched on, it will
automatically switch to the AUX IN input. At this point, any
active Bluetooth
®
connection will be interrupted and
playback will continue via the AUX IN input.
Tracks cannot be skipped using the (3) and (2) buttons
in AUX IN mode.
• Briefly press the on/off button (1) to switch the speaker on. A
beep will sound and the power/charging LED (11) will light up
blue. Open the appliance lid (9).
• Connect the audio device to the AUX IN jack of the speaker. Use
the supplied 3.5 mm jack cable (C).
To Next Page
Loading...
