Silvercrest SLL 16 C1 - Cleaning; Storing the Device When Not in Use

SilverCrest SLL 16 C1
48 - English
• If a 3.5 mm cable is plugged into the AUX IN jack (7), remove it,
because the Bluetooth
®
feature does not work if a cable is plugged
in.
• Make sure that a previously paired connection with another
Bluetooth
®
device is no longer active. If necessary, disconnect the
connection and reconnect to the desired audio source.
No sound
• Increase the volume of the speaker. In AUX IN mode, increasing the
volume on your playback device can also solve the problem.
You notice limitations in functionality
• This problem may be related to the software of your Bluetooth
®
device not being up to date. If necessary, try to update the software
version. Please consult the operating manual of your Bluetooth
®
device.
11. Cleaning
• Do not allow moisture to enter the speaker or the connection socket.
Keep the appliance lid (9) closed during cleaning.
• Clean the speaker with a slightly damp, soft cloth only.
• Do not use abrasive, scouring or solvent-based cleaning agents. The
surfaces of the speaker can be irreparably damaged.
12. Storing the device when not in use
Store the speaker in a dry, clean location away from direct sunlight.
Recharge the integrated battery from time to time to extend its service
life.