Silvercrest SLM 10 C1 - Page 44

SilverCrest SLM 10 C1
42 - English
• Connect the USB A plug of the charging cable (B) to a suitable USB
mains adapter.
Connect the Micro USB connector of the charging cable (B) to the Micro
USB charging socket (7) of the speaker. The power/charging LED (12)
lights up green while charging and then lights up green when charging
is complete.
•
• Disconnect the USB charging cable (B) from the speaker after
charging and close the appliance lid (9).
A low battery level will be indicated as follows:
A series of beeps will sound and the power/charging LED
(12) will briefly light up red. Then, the power/charging LED
(12) will display the current operating mode again.
This process is repeated in increasingly shorter intervals until
the battery is depleted. The speaker will then switch off
automatically.