Silvercrest SLM 10 C1 - Automatic Connection When Switching on

SilverCrest SLM 10 C1
English - 45
(5) button. Alternatively, you can disable the Bluetooth
®
feature on the
currently connected Bluetooth
®
device.
A beep will sound and the power/charge LED (12) will flash blue
rapidly. Pairing mode is now active and the speaker can be connected
to another Bluetooth
®
device.
The speaker will switch off automatically after approximately
30 minutes if no connection is established. The process must
be restarted in this case.
The speaker will switch off automatically after approximately
30 minutes if no signal is received in Bluetooth
®
mode within
this time.
9.2.2 Automatic connection when switching on
The speaker automatically connects to the last connected Bluetooth
®
device when switched on.
If this is not the case, you will need to connect manually. Please consult
the operating instructions of your Bluetooth
®
device.