Silvercrest SND 3600 A1 User Manual

Handling and operation
GB
IE
18
SND 3600 A1
Slide the holder with the negatives and/or slides to be scanned ♦
into the slot
3
on the device until it locks into place.
The scan motif will be displayed in the preview fi eld .
NOTICE
A holder that has been inserted into the device cannot be pulled ►
out again, it has to be pushed completely through the device.
Adjust the holder, if r
equired, until the scan motif is displayed ♦
optimally in the preview window.
If necessary
, you can set the electrical balance (Balance), the ♦
exposure (Exposure), the brightness (Brightness), the contrast
(Contrast) and the satur
ation (Saturation) by pressing on the
button “Adjust”.
A settings window will be opened.
Click on ♦ to increase the corresponding value and on to
decrease the corresponding value.
Use the slide controller to adjust the electrical balance (Colour
balance).
Click on the “OK” button to accept the setting and return to the ♦
“Capture” window.

Silvercrest SND 3600 A1 Specifications

General

Brand	Silvercrest
Model	SND 3600 A1
Category	Scanner
Language	English