Silvercrest 365299 2204 User Manual (English)

Questions and Answers:

D
Dana RomanAug 9, 2025
What to do if Silvercrest 365299 2204 Scanner is not recognized after software installation?
- M
  Miguel PatelAug 10, 2025
  If your Silvercrest Scanner isn't being recognized by your computer after you've installed the software, there are a few potential reasons. First, ensure the scanner is properly connected to a USB port on your computer. If it is, try connecting it to a different USB port, as the initial port may be defective. As a last resort, try restarting your computer.
J
Jason MillerAug 16, 2025
Why is the image quality poor on my Silvercrest Scanner?
- J
  jamieorozcoAug 16, 2025
  If you're experiencing poor image quality with your Silvercrest Scanner, it might be due to dust. Check for dust on the scanner's background lighting and clean it as described in the "Cleaning" section. Also, inspect your film or slide for any dust and clean it carefully.
M
Meghan MyersAug 22, 2025
How to fix blurred images on Silvercrest Scanner?
- M
  Michael MilesAug 22, 2025
  If your scanned images from the Silvercrest Scanner are blurred, it could be due to the scanner lens fogging up because of temperature differences. Wait until the device adjusts to the room temperature.
A
aliciajonesAug 27, 2025
What to do if PWR LED 1 does not light up on Silvercrest 365299 2204 Scanner?
- B
  Brandy CarrollAug 28, 2025
  If the PWR LED 1 on your Silvercrest Scanner isn't lighting up, it might not be connected correctly. Ensure that the device is properly connected.
B
Brian FullerSep 2, 2025
What to do if anti-virus is blocking Silvercrest 365299 2204 Scanner?
- A
  Ashley GallagherSep 3, 2025
  To resolve this issue, you should check the settings of your anti-virus software.