Silvercrest SND 3600 A2 - Completing Setup and Device Connection

Setting up and connecting
13
SND 3600 A2
GB
CY
The display will show that the installation has been completed.
♦ Click on the button “Finish”.
The start window will be displayed again.
♦ Click on the button “Exit Installation” to exit the installation
programme.
Connection
♦ Connect the USB cable
4
to a USB port on your computer.
The computer recognizes the new hardware and starts the
automatic driver installation.
IB_73761_SDN3600A2_LB7.indb 13IB_73761_SDN3600A2_LB7.indb 13 25.09.13 11:2725.09.13 11:27