Operating components/Handling …
GB
CY
14
SND 3600 A2
Operating components (see fold-out pages)
LED PWR
2
SCAN button
3
Insert slot for the negative or slide magazine
4
USB connection cable
5
Film holder
6
Slide magazine
7
Cleaning brush
Handling and operation
In this chapter you receive important information for the handling
and operation of the device.
Insert the negative strip
♦ Release the fastener on the front of the fi lm holder
5
and open
the holder.
♦ Insert the fi lm strip, correctly orientated, into the holder.
♦ Close the holder making sure that the cover locks into place.
Inserting slides
♦ Place the slides, with the sides the right way round, into the
intended slot of the slide magazine
6
.
♦ First guide the slide magazine
6
, with the viewing window
leading, into the insert slot
3
.
By means of the slider, located laterally on the slide magazine
6
,
the slides contained in the slots are pushed individually into the
scanner.
IB_73761_SDN3600A2_LB7.indb 14IB_73761_SDN3600A2_LB7.indb 14 25.09.13 11:2725.09.13 11:27