Silvercrest SON 90 A1 - Threading Yarn for the Left Needle (Blue)

- 12 -
2. Thread the yarn into the thread guide in that you pull the thread down
until it slips under the thread guide (2) (Fig. 25).
3. Firmly hold the yarn with your fingers, guide it between and through
the discs of the thread tension selector t and then pull it down (3)
(Fig. 26).
Note:
The yarn must lie correctly between the two discs of the thread tension
selector t.
4. Thread the yarn as per the green markings (4- 7) (Fig. 27/28).
5. Thread the yarn through the right needle (8) (Fig. 28).
6. Lay the yarn to the rear under the sewing foot a.
Fig. 25
Fig. 26
Fig. 27
Fig. 28
5
6
IB_64780_SON 90 A1_LB6 08.03.2011 17:22 Uhr Seite 12