Silvercrest SON 90 A1 - Overlock Seams; Roll Hemmings

- 19 -
Overlock seams
• Open the front flap 0.
• Slide the seam width switch d to "S", so that the seam width finger is
pushed forward (1) (Fig. 49).
Note:
The seam width switch d must be pushed until it can go no further.
Otherwise, the seams will be untidy.
Roll hemmings
• Open the front flap 0.
• Slide the seam width switch d to "R", so that the seam width finger is
pushed backward (1) (Fig. 50).
Note:
The seam width switch d must be pushed until it can go no further,
otherwise the seams will be untidy.
Standard position
Roll hem
Fig. 49
Fig. 50
IB_64780_SON 90 A1_LB6 08.03.2011 17:22 Uhr Seite 19