GB
│
IE
│
9 ■
SPR 330 A1
Ƈ Lift the attached seal of the fresh water tank s up out of the opening (see Fig. 4).
Ƈ Fill the appliance with tap water (see Fig. 5) or distilled water, and add uphol-
stery cleaning agent or W5 vinegar-based cleaner, if needed. Please observe
the processing instructions of the manufacturer. Make sure that the fresh water
tank
s is filled no higher than the MAX marking.
Fig. 5 Fig. 6
Ƈ Press the seal of the fresh water tank
s entirely back into the opening (see Fig. 6).
Ƈ Grip the fresh water tank
s by the handle and place it back in the appliance.
Push it forward into the appliance until it audibly clicks into place (see Fig. 7).
1
2
Fig. 7
To Next Page
Loading...
