Silvercrest SPR 330 A1 - Handle and Cleaning Attachment Care

GB
│
IE
│
15 ■
SPR 330 A1
Cleaning the handle and cleaning attachment
Ƈ Make sure that the power plug 6 of the appliance is not plugged in.
Ƈ Press the cleaning attachment locking button
e and pull the cleaning attach-
ment 8 off the handle 9 (see Fig. 22).
1
2
1
2
Fig. 22 Fig. 23
Ƈ Press the cleaning attachment cover locking button
w and pull the cleaning
attachment cover q off the cleaning attachment 8 (see Fig. 23).
Ƈ Clean the cleaning attachment 8 and the cleaning attachment cover q in
warm running water.
Ƈ Clean the handle
9 with a damp cloth, if necessary. For stubborn soiling, add
a little mild detergent to the cloth.
Ƈ Allow the cleaning attachment 8 and the cleaning attachment cover q to dry
completely before attaching them to the handle 9 again.
Ƈ Place the cleaning attachment cover q back on the cleaning attachment 8
and slide it down until the cleaning attachment cover locking button w
completely engages with the opening (see Fig. 24).
Fig. 24 Fig. 25
Ƈ Place the cleaning attachment 8 on the handle 9 and slide it down until the clean-
ing attachment locking button e completely engages with the opening (See Fig. 25).