Silvercrest SPR 330 A1 - Waste Water Tank Maintenance

■ 12
│
GB
│
IE
SPR 330 A1
Cleaning the waste water tank
NOTE
► Empty the waste water tank
3 as soon as the dirty water has reached the
MAX marking.
► When emptying the waste water tank 3 make sure that the drain (e.g. the
wash basin) is not blocked by hair or coarse dirt.
► Once the waste water tank 3 is full, the appliance is automatically
switched off by the float switch
o.
Ƈ Hold the waste water tank 3 by gripping the handle and pull it towards you out
of the appliance (see Fig. 11).
Fig. 11 Fig. 12
Ƈ Remove the dirt filter
a from the lid of the waste water tank p by gripping the
grooves on the sides of the dirt filter a with your thumb and forefinger. Pull the
dirt filter a upwards out of the lid of the waste water tank p (see Fig. 12).
Ƈ Pull the lid
of the waste water tank p upwards off the waste water tank 3
(see Fig. 13).
Fig. 13 Fig. 14