GB
│
IE
│
11 ■
SPR 330 A1
Ƈ Hold the cleaning attachment 8 2–3 cm above the area to be cleaned and
press the spray button r to apply water / cleaning solution from the spray
nozzle t (see Fig. 9).
Fig. 9 Fig. 10
Ƈ Use the brush
z on the cleaning attachment 8 to brush the soiled area with
light pressure. If necessary, add more water / cleaning solution to the soiled
area by pressing the spray button r.
Ƈ Then press the suction opening
u of the cleaning attachment 8 against the
soiled area. Drag the cleaning attachment 8 multiple times in the desired
direction to suck up dirt and liquid (see Fig. 10).
Ƈ After cleaning, press the On/Off switch
2 to switch off the appliance.
Cleaning and maintenance
RISK OF ELECTRIC SHOCK!
►
Switch the appliance off and pull out the power plug
6 before cleaning
the appliance!
CAUTION! PROPERTY DAMAGE!
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.
NOTE
► Empty the waste water tank
3 after every use.
► Clean the dirt filter a after each use and let it dry completely before
putting it back into the waste water tank 3.
Ƈ Clean the appliance with a damp cloth. For stubborn soiling, add a little mild
detergent to the cloth.
To Next Page
Loading...
