GB
│
IE
│
13 ■
SPR 330 A1
Ƈ Tip out the dirty water and dirt (see Fig. 14).
Ƈ Rinse the waste water tank
3 in warm running water (see Fig. 15).
Fig. 15 Fig. 16
Ƈ Clean the dirt filter
a and the lid of the waste water tank p with the float
switch o under warm running water (see Fig. 16). If necessary, use a mild
detergent.
Ƈ If necessary, clean the recess for the waste water tank 3 in the appliance with
a damp cloth. Remove all dirt from the opening (See Fig. 17).
Fig. 17 Fig. 18
Ƈ Let the dirt filter
a, the waste water tank 3 and the lid of the waste water
tank p, including float switch o, dry completely (see Fig. 18).