Silvercrest SPR 330 A1 - Waste Water Tank Reassembly

■ 14
│
GB
│
IE
SPR 330 A1
Ƈ When the parts have dried, place the lid of the waste water tank p back on the
waste water tank 3. Press it all the way down until it sits firmly on the waste
water tank 3 (see Fig. 19).
Fig. 19 Fig. 20
Ƈ Place the dirt filter
a back on the lid of the waste water tank p (see Fig. 20).
Ƈ Grip the waste water tank
3 by the handle and place it back in the appliance.
Push it forward into the appliance until it audibly clicks into place (see Fig. 21).
1
2
Fig. 21