Silvercrest SRBN 5 A1 User Manual

GB
│
IE
│
5 ■
SRBN 5 A1
Notice regarding power disconnection
■ The device consumes power in standby mode. The On/Standby switch/Volume
control
and the main switch for this device do not completely disconnect it
from the power supply. To completely separate the device from the power supply,
the plug must be disconnected from the mains power socket. The mains power
socket must be easily accessible so that the power cable can be easily disconnected
in an emergency.
Power saving mode
If there is no input signal to the 3.5 mm jack (AUX IN) or no playback in
Bluetooth
®
operation, the device switches automatically into power saving
mode after 15 minutes.
The lighting on the frequency scale
goes out and any existing Bluetooth
®
connection will be terminated.
To exit power saving mode, use the operating mode selector switch
to change
the operating mode or switch the device off and then on again using the On/
Standby switch/Volume control
.
Descriptions of components
(See fold-out page for illustrations)
Speaker
Frequency scale
TUNING dial
On/Standby switch/Volume control ( /VOLUME)
Operating mode selector switch (FM/ /AUX)
Telescopic aerial
3.5 mm jack (AUX IN)
3.5 mm headphone socket ( )
Main switch (ON/OFF)
Operating instructions

Silvercrest SRBN 5 A1 Specifications

General

Brand	Silvercrest
Model	SRBN 5 A1
Category	Radio
Language	English