EasyManuals Logo

Silvercrest SRBX 2200 A1 User Manual

Silvercrest SRBX 2200 A1
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
36 
GB
MT
SRBX 2200 A1
Charging the batteries
WARNING
Switch the appliance off by pressing the On/Off switch
4
before
starting the charging process.
Do not switch on the appliance while charging it. If necessary, remove the
barrel plug of the mains adapter
13
from the mains connection and
close the lid
2
before you use the appliance.
The appliance runs on rechargeable lithium-ion batteries. Before using the
appliance for the first time, the batteries must be charged:
Flip open the lid
2
of the mains connection .
Plug the barrel plug of the mains adapter
13
directly into the mains connection
on the appliance, and plug the mains adapter
13
into a wall socket.
The charging LED
lights up red during charging. As soon as the batteries
are fully charged, the charging LED
turns green.
NOTE
If you switch on the appliance without the brush head holder
8
attached
before or during the charging process, the charging LED lights up green
for about 30 seconds. The appliance will not charge.
Switch off the appliance to start charging.
When charging is complete, which can take around 4–5 hours with fully
discharged batteries, the appliance automatically switches to a trickle
charge (maintenance function). To avoid possible damage to the batteries,
do not leave the appliance permanentlyconnected to the mains.
Only recharge the batteries when the power of the appliance is noticeably
weaker and the charging LED
is flashing red.
Disconnect the mains adapter
13
from the appliance and close the lid
2
of
the mains connection
.
Assembling the appliance
RISK OF ELECTRIC SHOCK
Always disconnect the mains adapter
13
from the mains power socket and
switch off the appliance before assembling or disassembling it.
You can use the appliance with or without the extension rod
6
.
To reach spots that are hard to access, attach the extension rod
6
between the
handle
3
and brush head holder
8
:
Slide the extension rod
6
onto the handle
3
so that the release button
5
on the handle
3
locks into the latch of the extension rod
6
.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SRBX 2200 A1 and is the answer not in the manual?

Silvercrest SRBX 2200 A1 Specifications

General IconGeneral
BrandSilvercrest
ModelSRBX 2200 A1
CategoryUltrasonic Jewelry Cleaner
LanguageEnglish

Related product manuals