Silvercrest SRBX 2200 A1 - Operating the Appliance; Usage and Cleaning Techniques; Handling Brush Head Blockages

■ 38
│
GB
│
MT
SRBX 2200 A1
Operating the appliance
WARNING
► Do not switch on the appliance while charging it. If necessary, remove the
barrel plug of the mains adapter
13
from the mains connection and
close the lid
2
before you use the appliance.
CAUTION – PROPERTY DAMAGE!
► Do not use abrasive cleaning agents. They could irreparably damage the
surface you are cleaning.
NOTE
► We recommend using water. For stubborn dirt, use a mild detergent. Apply
it directly to the brush head
10
/
11
/
12

or the surface you are cleaning.
♦ Hold the device close to the surface.
♦ Switch the appliance on by pressing the On/Off switch
4
.
♦ Guide the brush head
10
/
11
/
12

over the surface in circular motions, applying
gentle pressure.
NOTE
► If you press the brush head
10
/
11
/
12
too firmly onto the surface being
cleaned, this can lead to a blockage of the brush head
10
/
11
/
12
.
► If the brush head
10
/
11
/
12
is blocked, the appliance automatically stops
and switches off. The charging LED flashes briefly red. Press the On/Off
switch
4
to switch the appliance back on.
♦ Once you have finished cleaning, press the On/Off switch

4
to turn off
the appliance.