EasyManuals Logo

Silvercrest SRRP 3.7 A1 User Manual

Silvercrest SRRP 3.7 A1
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
13
GB
6. The plug symbol|12 is lit red and the battery is charged.
When the battery is fully charged, 100% is displayed.
When the battery is fully charged, the device can be used
for approximately 60 minutes without being connected to
the power supply.
NOTE: the rotary shaver|9 can also be charged without a bat-
tery charger|23 only using the plug-in power unit|21. For this
purpose, insert the small Micro USB plug of the plug-in power
unit|21 directly into the Micro USB port|15 of the rotary shaver.
6. Operation
6.1 Before switching on for the first time
CAUTION:
~ After unpacking, there could still be oil residues on the shav-
ing heads|5 of the shaving attachment|6. Remove these with
an absorbent, lint-free cloth before using the device for the
first time.
Regardless of the charging state of the battery, the rotary shaver|
9
can always be used in mains operation.
1. Before switching to mains operation, ensure that the device
is switched off.
2. Insert the small Micro USB plug of the plug-in power unit|21
into the Micro USB port|15 of the rotary shaver.
BBB5RWDWLRQVUDVLHUHUB3UHPLXPB%ERRN6HLWH)UHLWDJ1RYHPEHU

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SRRP 3.7 A1 and is the answer not in the manual?

Silvercrest SRRP 3.7 A1 Specifications

General IconGeneral
BrandSilvercrest
ModelSRRP 3.7 A1
CategoryElectric Shaver
LanguageEnglish

Related product manuals