Silvercrest SRRP 3.7 A1 - Cleaning and care

18
GB
7. Cleaning and care
DANGER! Risk of electric shock!
~ The hand-held part must be disconnected from the power ca-
ble before it is cleaned in water.
WARNING! Risk of injury!
~ Always switch off the device before cleaning it.
WARNING! Risk of material damage!
~ The blade unit|5 of the shaving attachment|6 can be
cleaned using water. Do not use any other liquids.
~ Do not use any astringent or abrasive cleaning agents.
NOTE: clean the device after every use.
7.1 Shaver
• Wipe down the housing of the shaver|9 with a damp cloth.
7.2 Shaving attachment / blade unit
Dry cleaning of the shaving attachment
1. Clean the 3 shaving heads|5 after each shave using the
cleaning brush|24.
2. Press the release button|7 on the shaving attachment|6, so
that the blade unit|5 opens.
3. Carefully tap the blade unit|5 to empty it.
4. Remove the hair remnants by using the cleaning brush|24.
BBB5RWDWLRQVUDVLHUHUB3UHPLXPB%ERRN6HLWH)UHLWDJ1RYHPEHU