16
GB
NOTES:
• Shaving is possible both in battery mode and in mains oper-
ation.
• Initial use may cause temporary irritation or redness of the
skin, as the skin has to adjust to shaving. This is normal and
usually lasts between 2 to 4 weeks.
• Hold the blade unit|5 parallel to the surface of the skin, and
gently move it over your face using circular motions.
• Shave against the direction of your beard growth.
• Stretch your skin in complicated areas, such as the chin, to
achieve better results.
• Switch off the device after shaving, clean the parts carefully
(Chapter "Cleaning and care" on page 18) and to protect
the shaving heads|5, slide the protective cap|17 onto the
shaving attachment|6 from below.
6.6 Cutting hairlines and beard
WARNING! Risk of injury!
~ The points of the beard trimmer attachment|3 are sharp.
Handle with care.
• Figure C: adjust the cutting length at the comb attach-
ment|1 according to the desired hair length. Read the cut-
ting length on the side of the comb attachment|1 at the
marking|2. The arrow symbol S|18 indicates which cutting
length is set. Now, shorten your beard step-by-step.
NOTE: ensure that the comb attachment|1 is still firmly attached
to the device after adjustment.
BBB5RWDWLRQVUDVLHUHUB3UHPLXPB%ERRN6HLWH)UHLWDJ1RYHPEHU
To Next Page
Loading...
Need help?
General
