EasyManua.ls Logo

Silvercrest SRV 35 A1 - Technical Data; Intended Use; Equipment; Scope of Delivery

Silvercrest SRV 35 A1
161 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB/IE/NI/CY/MT6
1. Introduction
We congratulate you on your new device purchase.
You have thus opted for a high quality product.
These Directions for Use are an integral part of this
product. They contain important information for
safety, use and disposal. Prior to the product use,
make yourself familiar with all instructions for use
and safety. Use the product only as described and
only for the specified fields of use. If you hand on
the product to third parties, also hand over all the
product documents.
1.1 Intended Use
This unit is suitable for circulating air in dry indoor
spaces. Any other use or modification of the unit is
considered improper and involves a considerable
risk of accident. We accept no liability for damage
resulting from improper use. The unit is intended for
private use only and not for commercial use.
1.2 Scope of Delivery
1 Tower fan SRV 35 A1
1 Mains adapter
1 Remote control
1 Instruction manual
1.3 Equipment
Fan
1 On/Off button
2 Fan speed button
3 Oscillation button
4 Display
5 Timer key
6 Mode button
TOWER FAN SRV 35 A1
Remote control
7 Mode button
8 Timer button
9 Mute button
10 Plus button
11 Minus button
12 Oscillation button
13 On/Off button
14 Battery compartment
15 Tab
16 Button cell (battery)
17 Mains adapter
1.4 Technical Data
Input voltage: 24 V
Power consumption: 35 W
Mains adapter AS3603A-2401500EU (only
for use with tower fan SRV 35 A1)
Input voltage: 100-240 V
~
Rated frequency: 50/60 Hz
Output power: 36 W
Protection class:
Mains cable length: 1.8 m
Remote control (only for use with tower fan
SRV 35 A1)
Battery supply: 3 V (Direct current)
CR2025
: Lithium-Batterie

Table of Contents

Related product manuals