Silvercrest SST 40 A1 - Using with Additional Accessories

■ 12
│
GB
│
IE
SST 40 A1
Using the appliance with additional accessories
NOTE
► Always vacuum at level 3 when using additional accessories in order to achieve
optimum vacuuming results.
To use the additional accessories, you must fit the short handle g, the carrying
strapj and the suction hose d.
♦ Press the release button 3 and carefully pull the long handle 2 from the motor
unit 8 (see fig. 3).
♦ Carefully push the short handle g onto the motor unit 8 until it clicks into place
(see fig. 4).
♦ Feed the carrying strap j through the strap attachments 5/q on the rear of
the motor unit 8 and close the Velcro fasteners (see figs. 5 and 6).
♦ Press the release button w and carefully pull the floor nozzle r from the motor
unit 8 (see fig. 7).
♦ Push the suction hose adapter f into the motor unit 8 until it clicks into place
(see fig. 8).
1.
2.
Fig. 3 Fig. 4 Fig. 5
1.
2.
Fig. 6 Fig. 7 Fig. 8
IB_329834_SST40A1_LB8_short.indb 12 24.09.2021 08:31:46