15 GB/IE
Before Initial Use / Operation
j Insert the mains plug
12
into a power socket. The number
180
3 Min
(180 seconds) appears in the display
2
as standard.
m Important! Ensure that the mains voltage is
220 -240 V
! (See the
type plate on the underside of the device). The device might
otherwise be damaged.
Q
Operation
Important! Fittings, stickers and decorations that are loosely at-
tached to objects, as well as other loose parts, e.g. screws on / in
spectacles, may become detached during the cleaning process.
You should therefore clean such items not more than once a month.
Note: The On-switch “ON”
1
and the Off-switch “OFF”
3
simply
control the time interval of the timer or the cleaning process. The actual
switching on and off of the device is controlled by the mains plug
12
.
Q
Cleaning without the Insert
j Ensure that the device is disconnected from the mains supply.
j Open the lid
5
manually.
j Place the object to be cleaned into the stainless steel tank
7
.
j Then fill the stainless steel tank
7
with normal tap water.
j The liquid must cover the object that is to be cleaned, but must not
exceed the mark indicating the maximum filling height.
j If the stainless steel tank
7
overflows, wipe off the outside of the
device immediately until dry.
m Important! Never use the ultrasonic cleaning device without
water as the device may be damaged!
To Next Page
Loading...
