21 GB/IE
Problems and Solutions
Q
Problems and Solutions
Problem /
Fault
Possible
Cause(s)
Solution
The device is
connected to
the power sup-
ply but the dis-
play is blank
2
The mains plug
12
is not cor-
rectly inserted.
Insert the mains plug
12
firmly
in the power socket.
No power
supply.
If necessary, have the 230 V sock-
et to which the device is connect-
ed or the installation checked by
a professional electrician.
The mains lead
is broken.
Repairs should only be carried
out by a specialist dealer.
The object to be
cleaned remains
dirty.
The timer was
not started.
Switch on the timer with the On-
switch
1
.
There is no or
too little water in
the stainless
steel tank
7
.
The stainless steel tank
7
can
be filled up to the “MAX” mark
with normal tap water or a
cleaning mixture (see the sec-
tions “Operation” and “Clean-
ing Methods”).
No detergent
was added.
Add cleaning concentrate accord-
ing to the type of soiling (see the
section on “Cleaning Methods”).
Too little deter-
gent was add-
ed.
In the case of stubborn dirt, in-
crease the cleaning mixture (see
the section on “Cleaning Meth-
ods”) to 2 parts of water and
1 part of washing-up liquid
(e.g. 200 ml of water, 100 ml of
washing-up liquid.
To Next Page
Loading...
