10 GB/IE/NI/CY
Only connect the product to
a grounded power supply.
Make sure the power plug is
connected properly.
To avoid damaging the power
cord, do not squeeze, bend or
chafe it on sharp edges. Keep
it away from hot surfaces and
open flames as well.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Pull the plug and not the cable
itself to disconnect the product
from the power supply.
Connect the product to an
easily reachable electrical outlet
so that in case of an emergency
the product can be unplugged
immediately.
This product is not intended
to be operated by means of
an external timer or separate
remote-control system.
Do not operate or touch the
product with wet hands.
Fire/burn hazard and heat
WARNING!
Hot surface!
Keep children and pets away
from the product while it is in
operation or cooling down. The
accessible parts are hot.
m
CAUTION! The surfaces are
liable to get hot during use.
m
Burn hazard! The product
surface is subject to residual
heat for some time after use.
Do not touch the product‘s
hot surfaces and beware of
escaping steam. Hold the
product by its handle only.
To Next Page
Loading...
