Silverline 282400 - Introduction and Specifications; Description of Symbols; Technical Abbreviations Key; Product Specification Details

GB
8
Maximum operating pressure:..........................................8Bar
Working pressure: .......................................5-8Bar (75-115psi)
Air consumption: ........................................5L/s (10.69ft3/min)
Air inlet:..........................................................¼" BSP
Minimum hose diameter: ...............................outer diameter 8mm
Nailcapacity: ................................................... 90 pieces
Nail gauge:.................................................. 10-12 gauge
Nail head diameter:.............................................6.8-7.2mm
Nail shank diameter:......................................... 2.87-3.33mm
Nail length:.....................................................50-90mm
Dimensions (L x W x H):..................................458 x 142 x 365mm
Weight: ............................................................4.2kg
Aspartofourongoingproductdevelopment,specicationsof
Silverlineproductsmayalterwithoutnotice.
Sound and vibration information:
Sound pressure L
PA
: ..............................................84.2dB(A)
Sound power L
WA
:................................................97.2dB(A)
UncertaintyK:........................................................3dB
Vibration emission value: ...........................................4.2m/s
2
Uncertainty: ......................................................1.5m/s
2
Thesoundintensitylevelfortheoperatormayexceed85dB(A)
andsoundprotectionmeasuresarenecessary.
Technical Abbreviations Key
Specication
WARNING: Alwayswearearprotectionwherethesoundlevelexceeds85dB(A)andlimitthe
timeofexposureifnecessary.Ifsoundlevelsareuncomfortable,evenwithearprotection,stop
usingthetoolimmediatelyandchecktheearprotectioniscorrectlyttedandprovidesthecorrect
levelofsoundattenuationforthelevelofsoundproducedbyyourtool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tinglingandreducedabilitytogrip.Long-termexposurecanleadtoachroniccondition.Ifnecessary,
limit the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have a greater effect. Use the
guresprovidedinthespecicationrelatingtovibrationtocalculatethedurationandfrequency
of operating the tool.
Soundandvibrationlevelsinthespecicationaredeterminedaccordingtointernationalstandards.
Theguresrepresentnormaluseforthetoolinnormalworkingconditions.Apoorlymaintained,
incorrectlyassembled,ormisusedtool,mayproduceincreasedlevelsofnoiseandvibration.
www.osha.europa.eu provides information on sound and vibration levels in the workplace that
maybeusefultodomesticuserswhousetoolsforlongperiodsoftime.
The declared vibration total value has been measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.Thedeclaredvibrationtotalvaluemayalso
beusedinapreliminaryassessmentofexposure.
Description of Symbols
Theratingplateonyourtoolmayshowsymbols.Theserepresentimportantinformationaboutthe
product or instructions on its use.
Wear hearing protection.
Weareyeprotection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Conformstorelevantlegislationandsafetystandards
Caution!
DO NOT use on scaffoldings or ladders!
DONOTusewithcompressedgascylinders!
Environmental Protection
Airtoolsshouldnotbedisposedofwithhouseholdwaste.Theycontaintracesof
oilandotherlubricants.Pleaserecyclewherefacilitiesexist.Checkwithyourlocal
authorityorretailerforrecyclingadvice.
psi Pounds per square inch
° Degrees
Ø Diameter
BSP British Standard Pipe (thread)
nm Nanometre
dB(A) Decibel sound level (A weighted)
m/s
2
Metres per second squared (vibration
magnitude)
Introduction
ThankyouforpurchasingthisSilverlinetool.Thismanualcontainsinformationnecessary
for safe and effective operation of this product. This product has unique features and, even if
youarefamiliarwithsimilarproducts,itisnecessarytoreadthismanualcarefullytoensure
youfullyunderstandtheinstructions.Ensureallusersofthetoolreadandfullyunderstand
this manual.
Original Instructions
282400_Manual.indd 8 30/08/2019 09:52