Silverline 546534 - Troubleshooting

GB
14
Problem Possible cause Solution
No operation
Plug fuse Replace fuse
Worn brushes
Replace brushes (pair) with new, or have brushes replaced by an authorised
Silverline service centre
Power tool fault Contact an authorised Silverline service centre
Cutting performance poor
Teeth worn or damaged Replace saw Blade (36)
Incorrect saw blade type Replace saw blade with correct type for material being sawed
Incorrectsawbladespecication Ensuresawblademeetstherequiredbladespecicationforthismitresaw
Incorrectlyttedsawblade Removesawbladeandretexactlyaspertheinstructionsinthismanual
Power tool vibrating excessively
in use
Sawblade distorted, bent or damaged Replace saw blade immediately
Saw blade incorrectly mounted Re-tsawbladeexactlyaspertheinstructionsinthismanual
Power tool fault Contact an authorised Silverline service centre
Mitreorbevelangledifcult
to adjust
Build-up of saw dust Vacuum up sawdust
Troubleshooting
Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web: silverlinetools.com/en-GB/Support
Address:
Powerbox
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Storage
• The cutting head can be lowered and secured by the Cutting Head Latching Pin (28) to make the
saw a smaller, more secure size for storage
• Ensure all bevel and mitre locks are in place before storing
• Store this tool carefully if a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no longer functional
and are not viable for repair.
• Donotdisposeofpowertools,orotherwasteelectronicequipment(WEEE),with
household waste
• Contact your local waste disposal authority for information on the correct way to dispose
of power tools
546534_Manual.indd 14 28/09/2018 16:16