EasyManua.ls Logo

Silverline SILVER STORM Series - User Manual

Silverline SILVER STORM Series
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.silverlinetools.com
270289
600W Multipurpose Router
Défonceuse multifonctions 600 W
Tauch- und Kantenfräse, 600 W
Fresadora multifunción 600 W
Fresatrice multi-uso 600W
600 W multifunctionele freesmachine
®
600W Multipurpose Router
S
I
L
V
E
R
L
I
N
E
R
A
N
G
E
¼" / 3.1mm
270289_Z1MANPRO1.indd 3 22/10/2014 16:50

Table of Contents

Questions and Answers

  • M
    Marcus SanchezJul 28, 2025
    Why is my Silverline Wood Router not operating?
    • O
      omillsJul 28, 2025
      Your Silverline Wood Router might not be operating due to several reasons. First, check that power is available at the source. If the power supply is fine, the carbon brushes may be worn or sticking, in which case you should have them replaced by an authorised Silverline service centre. A faulty switch or motor components could also be the cause, and you should have the tool repaired by an authorised Silverline service centre.
  • J
    jeffrey17Aug 3, 2025
    What to do if my Silverline Wood Router has excessive vibration?
    • K
      Karen RodriguezAug 3, 2025
      If your Silverline Wood Router is vibrating excessively, it could be due to an incorrectly fitted or loose router bit; refit or tighten the router bit. Alternatively, the router bit may be bent or damaged, in which case you should replace it.
  • M
    Michael JonesAug 8, 2025
    Why does my Silverline Wood Router run or cut slowly?
    • P
      ppadillaAug 8, 2025
      If your Silverline Wood Router is running or cutting slowly, the cutter may be blunt or damaged, so resharpen or replace it. Another possibility is that the Variable Speed Dial is set low; increase the variable speed setting to resolve this.
  • R
    Ronald ManningAug 15, 2025
    What to do if heavy sparking occurs inside motor housing of Silverline Wood Router?
    • M
      Matthew BoothAug 15, 2025
      If heavy sparking occurs inside the motor housing of your Silverline Wood Router, the brushes may not be moving freely, so have the carbon brushes checked and replaced by an authorised Silverline service centre. It could also be due to an armature short-circuited or open-circuited, or a dirty commutator; in these cases, have the tool serviced by an authorised Silverline service centre.
  • R
    Rodney RodgersAug 21, 2025
    Why Silverline Wood Router makes an unusual sound?
    • V
      Valerie PetersAug 21, 2025
      If your Silverline Wood Router is making an unusual sound, it could be due to a mechanical obstruction or the armature having shorted sections. In either case, have the tool serviced by an authorised Silverline service centre.

Summary

Product Information and Safety

Description of Symbols

Explains symbols found on the tool and in the manual for safe operation.

General Safety

Provides essential safety warnings for operating the power tool.

Electrical Safety

Details precautions to avoid electric shock during operation and handling.

Personal Safety

Outlines measures for user protection, alertness, and proper attire during use.

Power Tool Use & Care

Guides on proper usage, maintenance, and safe storage of the power tool.

Additional Safety for Routers

Specific safety instructions and precautions for operating router tools.

Technical Specifications

Product Familiarisation

Intended Use

Describes the tool's purpose for cutting profiles, grooves, and edges in wood.

Unpacking Your Tool

Instructions for unpacking, inspecting, and checking the condition of the new tool.

Before Use Procedures

Covers fitting bases, parallel guides, router bits, and dust extraction.

Operation Guide

Depth Adjustment

Instructions for setting plunge depth and depth of cut for various bases.

Operation Controls and Usage

Covers switching on/off, speed control, and making cuts with the tool.

Troubleshooting Guide

Guarantee Information

Registering Your Purchase

How to register the product online to qualify for the 3-year guarantee.

Terms & Conditions

Outlines the conditions, coverage, and exclusions of the product guarantee.

CE Declaration of Conformity

Declares compliance with relevant EU directives and standards.

Silverline SILVER STORM Series Specifications

General IconGeneral
BrandSilverline
ModelSILVER STORM Series
CategoryPower Tool
LanguageEnglish

Related product manuals