What to do if air is not blasting when Air Trigger is pulled in Silverline 675078 Power Tool?
- RrpetersonJul 30, 2025
If air is not blasting when the Air Trigger is pulled on your Silverline Power Tool, it could be due to several reasons. First, the pressure might be incorrect, so set the correct air pressure according to the specifications. Second, there might be an air blockage. Check the air supply and disassemble and clean the Air Tyre Inflator if necessary. Finally, the hose might be clogged, or the hoses damaged or leaking. Remove the rubber hose and remove any blockages. Check the air supply hoses and connectors for damage or leakages and have them repaired or replaced as required.