63
SHIFT/THROTTLE CONTROL
SYSTEM
(MORSE CONTROLS)
(OPTIONAL)
________________
You may have chosen as an option when
you purchased your 352 MY, an electroni-
cally controlled Shift/Throttle Control Sys-
tem, manufactured by Morse Controls, Inc.
and factory installed at the Silverton plant.
The purpose of this system is to provide
the operator with smooth, positive shift and
throttle operation requiring minimal manual
effort. With this system, only one (1) shift/
throttle control lever is required per engine;
the left control lever operates the Port en-
gine and the right control lever operates the
Starboard engine.
The Morse Shift/Throttle Control System
is operated on DC electrical power, con-
trolled by a breaker switch located on the
AC/DC electrical Panel and described as
“Accessory” (See AC/DC Electrical Panel
Layout on Page 159, which illustrates the
location of the “Accessory” breaker switch
that controls the Morse Shift/Throttle
Control System). The control lever unit is
located on the Starboard side of the helm
station (See photograph above, which il-
lustrates the Morse Shift/Throttle Control
Unit).
REFER TO THE MORSE CONTROLS, INC.
MANUAL INCLUDED WITH YOUR OWN-
ER’S PACKET FOR ADDITIONAL TECHNI-
CAL INFORMATION CONCERNING THE
OPERATION AND MAINTENANCE OF
THE MORSE SHIFT/THROTTLE CON-
TROL SYSTEM.
To Next Page
Loading...