51
OIL X-CHANGE-R
SYSTEM
(OPTIONAL)
________________
You may have chosen as an option when
you purchased your 352 MY, an OIL X-
CHANGE-R System, manufactured by
Ray Zager & Company and factory installed
at the Silverton plant. The purpose of the
OIL X-CHANGE-R System is to automati-
cally drain, fi ll and maintain engine and/or
transmission oil with relative ease and no
spilled oil, which is normally associated
with your required periodic oil changes. The
OIL X-CHANGE-R System consists of an
enclosed pump, located in the engine com-
partment, which operates on DC electrical
power (See photograph below, which illus-
trates the location of the OIL X-CHANGE-R
System). The system pump is controlled
by a breaker switch, located on the AC/DC
Electrical Panel and described as “Acces-
sory” (See AC/DC Electrical Panel Layout
on Page 159, which illustrates the location
of the “Accessory” breaker switch that
controls the OIL X-CHANGE-R System).
Operation of the system is accomplished
by turning ON the toggle switch located on
the pump unit.
REFER TO THE OIL X-CHANGE-R SYS-
TEM MANUAL INCLUDED WITH YOUR
OWNER’S PACKET FOR INFORMATION
CONCERNING THE OPERATION AND
MAINTENANCE OF THIS SYSTEM.
To Next Page
Loading...