43
ICEMAKER UNIT
(OPTIONAL)
________________
You may have chosen as an option when
you purchased your 352 MY, an Icemaker
Unit, manufactured by U-Line Corporation
and factory installed at the Silverton plant.
The purpose of this system is to provide you
with a continuous supply of fresh ice upon
demand and as needed.
The Icemaker Unit, which is located on the
aft deck, operates on AC electrical power
and is controlled by a breaker switch located
on the AC/DC electrical Panel (See AC/DC
Electrical Panel Layout on Page 159,
which illustrates the location of the breaker
switch that controls the Icemaker Unit).
While your 352 MY is underway, you must
operate your generator (if so equipped) to
maintain operation of the Icemaker Unit
(See photograph below, which illustrates
the location of the Icemaker Unit).
REFER TO THE U-LINE CORPORATION
ICEMAKER MANUAL INCLUDED WITH
YOUR OWNER’S PACKET FOR SPECIFIC
INSTRUCTIONS CONCERNING THE OP-
ERATION AND MAINTENANCE OF THE
ICEMAKER UNIT.
To Next Page
Loading...