Chapter 3 —Changing the LCD Layout
11
The AUX device button
The AUX device button is equipped with a special
feature that no other button has. The control buttons on
the AUX device screen can easily be made identical to
the control buttons on any other device screen. You can
use it to operate a second TV, VCR, etc. In order to
re-configure the AUX device screen in this way:
1. Press AUX button for three seconds.
2. Press each number button until it disappears.
3. Tap screen once.
4. Then press any of the device buttons. The selected
device layout is copied to the AUX button.
5. Press the AUX button again. You will hear three beeps
and the SUR-20 returns to its normal operating mode.
To Next Page
Loading...
