Sima SUR-20 - Page 38

The SUR-20 User’s Manual
32
etc… will not be
activated as the macro
commands are being
entered. The macro
only works when the
SUR-20 is in its normal
operational mode.
Press the power
button.
This will
power the TV on when
the macro is running.
1
Press TV/Video. This
command will switch
the TV mode to Video
mode so that you can
watch the VCR tape.
1
Press the VCR device
screen button to
switch to the VCR
device menu.
This will enable you to
construct a series of
commands for the
VCR.
Press the power
button. This powers
your VCR on while the
macro is running.
1
You may need to set a
time delay between
turning on the VCR