Need help?Do you have a question about the SIMAG SD 22 and is the answer not in the manual?
Displays ice production capacity for lower model range under various conditions.
Displays ice production capacity for higher model range under various conditions.
Illustrates how cooling method affects ice production output.
Details voltage, capacity, weight, power, and wire size for all models.
Information on refrigerant type, charge, and expansion system.
Specifies discharge and suction pressure ranges for different models.
Electrical schematic for SD 22-40 models, covering air and water cooling.
Electrical schematic specific to the SD 60 air-cooled model.
Electrical schematic specific to the SD 60 water-cooled model.
Electrical schematic for the SD 80 model, for both cooling types.
Electrical schematic for SD 125-210 models, covering both cooling types.
Visual representations of the icemaking cycles (Freezing, Defrost, Harvest).
Identifies key components and briefly describes their roles in the cycles.
Overview of the manual's purpose and the SIMAG SD icemakers.
Procedures for safely unpacking and inspecting the icemaker upon arrival.
Guidelines for selecting an appropriate installation site and levelling the unit.
Factors to consider when choosing water supply for the icemaker.
Instructions for connecting the water inlet to the supply line.
Guidelines for correctly connecting the water drain line.
A checklist to ensure all installation steps are completed correctly.
Recommended practices for successful icemaker installation.
Step-by-step guide to start the icemaker after installation.
Checks to perform during the initial operation of the icemaker.
How to adjust the setting for ice cube thickness.
Guidance for the end-user on operation and care.
Explanation of how the freezing cycle functions.
Explanation of how the defrost or harvest cycle functions.
Describes the sequence of operations controlled by thermostats and timers.
Outlines the ON/OFF status of electrical components during cycles.
Key operational parameters and performance characteristics.
Description of the main power switch and its operation.
Explanation of the evaporator thermostat's role in cycle control.
Explanation of the bin thermostat's role in shutting off the unit.
Description of the timer's function in controlling cycle timing.
Explanation of the compressor switch's operation.
Details the safety device that protects against over-temperature/pressure.
Potential causes and solutions when the unit fails to start.
Reasons for and fixes for the compressor cycling on and off frequently.
Troubleshooting steps for producing small or cloudy ice cubes.
Diagnosing and resolving reduced ice production.
Identifying and fixing problems related to ice harvesting.
Addressing problems related to high or low discharge pressure.
General advice and recommended schedules for maintenance.
Tasks related to the upkeep of the icemaker unit itself.
Detailed steps for cleaning the internal water system.
Safe handling instructions and warnings for cleaning chemicals.
Procedures for rinsing and sanitizing the water system after cleaning.
General| Production | 22 kg/24h |
|---|---|
| Voltage | 220-240V |
| Ice type | Cube |
| Power supply | 220-240V |
| Frequency | 50Hz |
To Next Page
